Brine Water Heat Pump

we tap energy where it is stored - in the ground

Hautec brine-to-water heat pumps use the energy stored in the ground for room heating and where appropriate for the warm water supply. A ground heat collector absorbs the ground heat, which is boosted in the heat pump and then released to the living rooms through a warm water underfloor heating. Especially good operating results can be achieved with the optionally available HAUTEC EC high-grade steel vaporizer.

This system provides heating supply of up to 100%. 75% are provided by solar heat and 25% are required for the running of the machine.

The Hautec ground heat probe is a very popular solution for the operation of the Hautec brine-water heat pump.

The Hautec ground heat probe is vertically installed in depths of up to 100 m. Depending on the ground conditions the HAUTEC ground heat probe can absorb a heat output of up to 50-100 W per metre.

On request all brine-to-water heat pumps can be equipped for both heating and cooling operations.

The HAUTEC 3000 series has been especially designed for one-family houses. They offer an energy capacity of 4-12 kW and distinguish themselves through compactness and good value for money.

The Hautec brine-to-water heat pump series E is available with a heating output of 4-18 kW. Hautec also offers brine-to-water heat pumps with heating outputs of up to 240 kW for larger properties. Even larger capacity outputs can be achieved by means of module assembly.